How to install

Not much to do except pitch adjustment.

If you measure the length, there is a difference of about 0.4mm, so you need to adjust the pitch once.

It should be a little tighter than the original motor, but I decided to adjust it again when I changed the motor.

I like to tighten the pitch adjustment screw as much as possible and then loosen it 2 turns to adjust the pitch,

After a total of 2 turns, I loosened it another 0.75 turns (2 + 5/8).

I'm sure there are individual differences, but when I spun the motor with only the lower part

You can adjust the pitch without sharp and annoying sounds!

Review